Eldan Recycling offer a few different silos to optimize operation and enhance throughput throughout the plant.
The Buffer Silo (BFS5) is often located between the Super Chopper and the Rasper. It balances the output from the Super Chopper to the input rate of the Rasper. It is a 5 m3 Silo with slatted steel conveyor belt. It has a heavy rotating flail to control the feed rate.
The Buffer bin (BF3.0) has an open rectangular storage vessel with a slatted steel conveyor base, which transport the material at a constant but variable rate to control the amount. The slatted steel conveyor base is driven by a hydraulic motor with belonging pumping station which gives infinitely variable control. The out feed from the Buffer Silo can be varied in such a way that the successive machine is operating with optimum load. Volume: 3 m3.
The Silo FB200 is an closed cylindrical storage vessel with a propeller in the bottom. It balances the output from a Fine Granulator to a Separation Table C15 depending on Granulator output particle size. Volume 0.2 m3.
The Silo SMV200/400 is often located between the Granulator and the separation equipment. It balances the flow of granulated material to ensure that the separation works at maximum capacity, thus ensuring that the quality of separation is maintained. It is centred around an open rectangular storage vessel with a vibrating base. Outlet ø200mm/ ø400mm.
The Silo V2/V4 is most often located between the Rasper and the Granulator. It balances the output from the Rasper the input rate of the Granulator. It has a 4 m3 Silo with vibratory base to control the feed rate. Volume: 2 m3 or 4 m3.
The Tumble Back Feeder (TBF) which ensure optimum feeding of the successive machine. Volume: 5 m3.